Hyperion G7 Si-Graphene SV Standard Voltage pack
Hyperion G7 Si-Graphene SV Standard Voltage Series 50C&70C max types debut！！ Hyperion, the leader in quality Lithium batteries for almost two decades, has just released...
The Latest 2016 Model Hyperion Sentry 3 Battery Balancer, Checker, and Discharger
Part Number: HP-EOS08SENT3
The EOS Sentry3 is a quick, clever, and convenient device for analyzing your batteries. The Sentry3 shows at a glance the remaining capacity in your battery pack, cell balance, cell voltages and gap. Stand-alone Balance and Store Modes at industry-leading discharge performance. Sentry 3 provides the information and tools you need to maintain top performance and reliability from your batteries, and to avoid costly mistakes.
Store Mode: Allows you to discharge your HvLi, LiPo to 3.8V for storage. Discharge rate for Store mode is 150mah and will cutoff to 3.8V.
※NOTE: Display screen turns off when store mode ends. Please disconnect the Battery when finished the Store mode.（This mode does NOT support LiFe）
Balance Mode: Will automatically discharge the individual lithium-based cells such that they are closely balanced, if balance can be obtained while all cells remain at or above 3.8V.
※NOTE: Please disconnect the battery when the voltage of each cells reach almost same.
※This battery checker is compatible with JST-XH balance adapter when you use directly otherwise require each type of balance board adapter.
※ NiMh can be checked between 5V～25V using JST connector. JST connector with cable (click here) can be used to make an adapter to other-type pack connectors
※WARNING: Do not keep the Sentry3 connected to your battery for extremely long periods of time while in "STORE" mode. Do not leave your Sentry 3 connected to “STORE” mode once it reaches near 0% battery capacity. Parasitic draw from the internal components will cause the battery to fully-discharge past recommended voltages, thus rendering your battery pack not useful.
*When comparing the Sentry 3 results to the Sentry 2 and other brand battery checkers on the market there might be a difference in readings.
The Sentry version3 is a highly accurate battery measurement device which is loaded with the latest battery test data.
"For more details regarding Battery Voltage-to-Capacity please review the chart under the "Manuals & Support" tab."