Hyperion G7 Si-Graphene SV Standard Voltage pack
Hyperion G7 Si-Graphene SV Standard Voltage Series 50C&70C max types debut！！ Hyperion, the leader in quality Lithium batteries for almost two decades, has just released...
Versatile multirotor or nimble sport plane? The Convergence™ VTOL park flyer is both! Its exclusive flight control software makes transitioning between multirotor and airplane flight easier than it has ever been before. It’s even FPV-ready!
Part Number: AH-EFL11050
VTOL (Vertical Takeoff and Landing) RC models are usually a mixed bag when it comes to performance. If they are stable, their speed and agility is often lackluster. If they are nimble, pilots have to work harder to transition between hovering and airplane flight. The Convergence™ VTOL park flyer changes all that. Its unique design and exclusive flight control software give you the best of both agility and stability while making the transition between multirotor and airplane flight so smooth and predictable, you will feel right at home your first time on the sticks.
Sleek and Simple
Unlike complex VTOL aircraft that rotate the entire wing and require as many as four motors to achieve vertical and forward flight, the Convergence™ park flyer uses a simple, yet sleek, delta-wing design with three brushless motors - two rotating motors on the wing and a fixed-position motor in the tail.
In multirotor flight the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate down into the horizontal position and the model's elevons take over pitch and bank control. Yaw control in airplane flight is provided by differential thrust from the wing-mounted motors.
Exclusive Flight Control Software Makes it Easy
At the heart of it all is flight control software that has been expertly tuned by designer, Mike McConville, so almost any RC pilot can experience the fun of VTOL flight.
Making the transition between multirotor and airplane flight is as simple as flipping a switch. The flight controller will smoothly rotate thetwo wing-mounted motors into the correct flight attitude and activate the rear motor as needed.
Stability and Acro Flight Modes
These two flight modes give you a wide range of performance for every phase of flight.
The model is designed to accommodate several of the most popular FPV camera systems. There is a camera bay under the nose and a place to mount the video transmitter in the rear of the aircraft. Both locations are easy to access so installation takes just a few minutes.
Recommended FPV System - All Items Sold Separately
Super-Simple Transmitter Setup
This Bind-N-Fly® version can be flown with any full-range, 6+ channel DSMX®/DSM2® aircraft transmitter and comes equipped with a Spektrum serial receiver that is connected to the flight controller. No complex transmitter setup or programming is required. You use your “GEAR” switch for selecting Stability or Acro mode and your “AUX 1” switch to transition between multirotor and airplane flight.
Needed To Complete
What's in the box?
*Please make sure that the radio is transmitting only in DSMX, the BNF version will not work with DSM2.
FAA registration required
|We’re glad to announce that Air Craft is now the exclusive distributor within Japan for Horizon Hobby Model Aircraft, and Spektrum 2.4Ghz Transmitters. Horizon “Bind & Fly” models are known worldwide for their quality of construction and advanced technology, so even the micro-sized models fly with tremendous stability.|
Horizon BnF Model Technologies Overview
|Horizon Bind-N-Fly® with Spektrum 2.4GHz technology allows you to purchase one Transmitter, and fly a fleet of BnF model types! Air Craft carries 30 different BnF models now, and will be adding all the new models as they are released!|
|Spektrum™ DSSS 2.4GHz technology is world famous, and now fully certified for use in Japan! Its wideband signal can achieve up to 3x the range of the narrow-band 2.4GHz competition.|