Calypso EP Powered Glider RxR

0 Reviews | Write a Review | Flyzone | GP-FLZA3004

 

Air Craft, your Great Planes authorized distributor in Japan

 

Part Number: GP-FLZA3004

 

 

Product Description

Smooth and forgiving, the Calypso excels as a first electric sailplane. Ailerons are included for enjoying a wide envelope of soaring performance, and by adding optional flaps experienced glider pilots can move up to more advanced thermal chasing. Three versions — the RTF, Tx-R and Rx-R — come with a factory-installed brushless power system. There’s also an ARF version available for those who want to equip the Calypso with their choice of radio and motor. Since there’s no gluing to do and the only tool needed is a screwdriver, you can have the Calypso flight-ready in just 30 minutes!

This is RxR version. Enjoy radio equipment options with the Rx-R!

The Rx-R assembles just as easily, while offering you the flexibility to install your choice of receiver and battery. All onboard gear is already installed, getting you in the air that much quicker!

Features

  • Attach and align the tail by tightening just one screw.
  • The two-piece wing assembles quickly and removes easily for transport.
  • A large onboard compartment with magnetic hatch allows easy access to the flight battery.
  • The Calypso's wheel and skid plates allow for both grass and runway landings.
  • The wing includes independent aileron servos for mixing potential.
  • This bright, high-contrast trim scheme is easy to track at high altitudes.

The Calypso Rx-R includes:

  • Assembled, factory-finished airframe with landing wheel and skid plates
  • Factory-installed 28-30-1300kV brushless outrunner motor
  • 18A ESC
  • Servos

Required to complete

  • 4-5 channel transmitter & receiver
  • 11.1V 1300mAh LiPo battery
  • LiPo charger

 

Specifications

  • Wingspan: 73"" (1855mm)
  • Wing Area: 526 sq in (33.9 sq dm)
  • Length: 47"" (1195mm)
  • RTF Weight: 29-31 oz (820-880 g)
  • Center of Gravity (CG): 1/4"" (6.5mm) ahead of spar
  • Control Throws: High Rate Low Rate
  • Elevator, Up/Down: 3/4"" (19mm) 18° 1/2"" (13mm) 12°
  • Rudder, Right/Left: 1"" (25mm) 19° 3/4"" (19mm) 14°
  • Ailerons, Up/Down: 5/8"" (16mm) 19° 3/8"" (10mm) 11°
  • Flap: 7/8"" (22mm) 22°

 

FAA registration required

 

Be First to Write a Review!

Required or Upgrade Parts (8)