Calypso EP Powered Glider ARF

0 Reviews | Write a Review | Flyzone | GP-FLZA3006

 

Air Craft, your Great Planes authorized distributor in Japan

 

Part Number: GP-FLZA3006

 

 

Product Description

Smooth and forgiving, the Calypso excels as a first electric sailplane. Ailerons are included for enjoying a wide envelope of soaring performance, and by adding optional flaps experienced glider pilots can move up to more advanced thermal chasing. Three versions — the RTF, Tx-R and Rx-R — come with a factory-installed brushless power system. There’s also an ARF version available for those who want to equip the Calypso with their choice of radio and motor. Since there’s no gluing to do and the only tool needed is a screwdriver, you can have the Calypso flight-ready in just 30 minutes!

This Calypso ARF version is the most affordable, and provides discerning pilots with the most options for the power system, radio system and batteries.

Features

  • Attach and align the tail by tightening just one screw.
  • The two-piece wing assembles quickly and removes easily for transport.
  • A large onboard compartment with magnetic hatch allows easy access to the flight battery.
  • The Calypso's wheel and skid plates allow for both grass and runway landings.
  • The wing can be installed independent aileron servos for mixing potential.
  • This bright, high-contrast trim scheme is easy to track at high altitudes.

Required to complete

  • 4-5 channel Transmitter and Reaceiver
  • Four micro servos (HP-DS11-AMB x4)
  • Motor: 28-30-1300kV brushless outrunner
  • Electronic Speed Control: 18A
  • LiPo Battery: 11.1V 1300mAh
  • LiPo Battery Charger
  • Spinner and Folding Propeller

 

Specifications

  • Wingspan: 73"" (1855mm)
  • Wing Area: 526 sq in (33.9 sq dm)
  • Length: 47"" (1195mm)
  • RTF Weight: 29-31 oz (820-880 g)
  • Center of Gravity (CG): 1/4"" (6.5mm) ahead of spar
  • Control Throws: High Rate Low Rate
  • Elevator, Up/Down: 3/4"" (19mm) 18° 1/2"" (13mm) 12°
  • Rudder, Right/Left: 1"" (25mm) 19° 3/4"" (19mm) 14°
  • Ailerons, Up/Down: 5/8"" (16mm) 19° 3/8"" (10mm) 11°
  • Flap: 7/8"" (22mm) 22°

 

FAA registration required

 

Be First to Write a Review!

Required or Upgrade Parts (11)