40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2)

0 Reviews | Write a Review | Horizon Hobby | AH-EFLA1040LB

 

Air Craft, your Horizon Hobby authorized distributor in Japan

 

Part Number: AH-EFLA1040LB

 

Product Description

Overview

The E-flite® 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.

Key Features

  • Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
  • 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges, use with a large variety of brushless motors

Compatible Products:

E-flite 40-Amp Lite Pro Switch-Mode BEC Brushless ESC (V2) EFLA1040LB is compatible with EFL5550, EFL5575, EFL7150, EFL8850, PKZ6580, PKZ8050

 

Specifications

  • Amperage: 40-60
  • Brakes: Yes
  • Input Connector Types: EC3
  • Input Voltage: 10.8–22.2V
  • Output Connector: 3.5mm Bullet

 

Be First to Write a Review!