Air Craft
DataSheet

 GWS
IPS RLC Gearbox-Motor Sets
 
New!  IPS Gearbox + RLC 4.8V Motor

These are special sets, made for a maximum of 2S (7.4V) Lithium Polymer or 4 to 6-cell (4.8V-7.2V) NiMH battery packs.  Use of higher voltage packs will result in damage to the motor.  Compared to the XC-50 motor in standard IPS drive sets, the RLC will offer higher performance in the 2.2A-3.2A range.  We do not recommend current draw higher than 3.2A.  Use the GW-IPS-8A  Heatsink for best results.  For mounting both GWS and APC SF props (ring must be opened to 5mm) use the Air Craft 3.0mm Wobbly adapter.  You can also use MP-Jet Blind Mounting Nut M3 to mount APC props directly to the IPS's threaded shaft (APC adapter ring must be opened to 5mm).

Gear/Motor Set Prop  Current
GW-IPS-B-RLC
7:1		   8x4.3 GWS SF    3.2A
GW-IPS-C-RLC 8.6:1   8x4.3 GWS SF    2.5A
GW-IPS-D-RLC  9.66:1   9x4.7 GWS SF    3.4A 1

1 recommend APC 9x3.8

All tests above conducted with E-Tec 700mAh 7.4V 2S Lithium Pack
all the content on this page is the sole property of Air Craft, and may not be distributed, copied, paraphrased, or used in any way by any other commercial entity - February 29, 2004, March 2, 2004）