|
MONSTER TRUCKS - C50 MAXX
Intense speed, heroic leaps,
vicious crashes....
The C50 MAXX is the motor for your Monster Truck in extreme
environments. The motor body is machined to maximize strength and
integrates the heatsink to insure efficient cooling. The motor
endcaps are secured to the motor body with five high-grade steel
bolts each. The MAXX motors have a hardened, polished, 3.17mm shaft
 with
flat to fit all standard setscrew-type pinions. The 3.17mm
shaft is stepped down from the 5mm shaft running through the motor,
which supports the enormous forces generated inside. The C50 MAXX,
which a a bit shorter than the C50 L pictured left, are offered in
three versions (number of windings) which allows setups from 7 cells
with BEC controller up to 16 cells with OPTO controller for your
Monster.
HELICOPTERS
- C50 L and C50 XL
For helicopters running more than ten cells we now offer the durable
and efficient C50 Series motors in two lengths. These offer
the ultimate in steady performance and constant cooling for your
powerful Heli model
 They have a 5mm output shaft, which fits the commonly available
pinion gears for helicopters . There are many variations for each
length, based on the number of wire turns in the motor, to suit your
heli model type, flying style, and number of cells used. The four
3mm
mounting holes in the front bearing plate allows you to fit the
motors in many helicopters without additional adapters.
The Hacker Master Opto series of
Helicopter speed controllers, which all incorporate constant-rpm
heli mode, are the natural mates for the C50 motors. |
