Air Craft
DataSheet

PRICES HERE

AXI AC4130 Series
 
Big, Monster-torque brushless "OutRunner" motors with strong neodymium magnets. Suitable for large electric and glow conversion models from 3000g to 7000g in weight (6.6-15.5 lbs). The 4130-20 will loft scale gliders up to 10 Kg (22 lbs). These are the largest in the Model Motors lineup. Due to their high torque, these motors are capable of turning large propellers with a high level of efficiency, and without the need for a gearbox.  The hardened steel shaft supported by three ball bearings, and overall robust but lightweight construction, ensure a very long service life. New in the AXI design is the radial mounting. The optional radial mounting set consists of mounting flange, propeller adapter, securing collar, and screws. The dimensions are the same for both motors, differing only in the number of turns (Kv). Zero maintenance, quiet, high power-to-weight, and lovely to look at...
  4130-16
Specifications
Voltage range 16-24 cells
RPM per Volt 390 RPM/V
Max. Efficiency 88%
Max. Eff. Current 18-40 A (>84%)
Max. loading 60 A / 30 s
No load Current/10V 1,8 A
Internal resistance 63 mohm
Dimensions 49,6x65,5 mm
Shaft Diameter 6 mm
Weight 409 g
Recommended model weight 3000 - 6000 g
Propeller range 16 cells 16"x10"
20 cells 14"x10"
24 cells 14"x8"
 

     
   Motor mount AXI41xx/xx, AXI28xx/xx.
 

  


Animation shows radial mounting set          

                    






Radial mounting set

 

  
 
Speed controllers for 4130-16
Up to 20 cells:  Castle Creations Phoenix 80 or Hacker Master 48-3P OPTO
 More than 20 cells (6S):  Hacker Master 48 OPTO or Hacker Master 77 OPTO

Data Table for 4130-16

Motor Propeller
(no gearbox)		 Battery I/A RPM U (V) P- OUT (W) P- IN (W) Efficiency (%)
4130/16 13x11 Aer CAM Carbon 20xRC 1700 26,9 7900 21,9 512 589 87
4130/16 13x11 Aer CAM Carbon 24xRC 1700 35,3 9040 25,2 766 890 86
4130/16 14x8 Aer CAM Carbon 20xRC 1700 32,6 7550 21,2 599 691 87
4130/16 14x8 Aer CAM Carbon 24xRC 1700 41,5 8560 24,4 874 1013 86
4130/16 14x10 Aer CAM Carbon 16xRC 1700 28,6 6100 17,3 427 495 86
4130/16 14x10 Aer CAM Carbon 20xRC 1700 39 7140 20,7 686 807 85
4130/16 14x10 Aer CAM Carbon 24xRC 1700 49,1 8030 23,5 976 1154 85
4130/16 16x10 Aer CAM Carbon 16xRC 1700 32,6 5880 16,9 472 551 86
4130/16 16x10 Aer CAM Carbon 20xRC 1700 43,7 6830 20,1 741 878 84
4130/16 18x11 Aer CAM Carbon 16xRC 1700 40,5 5420 16,3 550 660 83
 
  4130-20
Specifications
Voltage range 20-30 cells
RPM per Volt 305 RPM/V
Max. Efficiency 88%
Max. Eff Current 18-40 A (>84%)
Max. loading 60 A / 30 s
No load Current/10V 1,6 A
Internal resistance 99 mohm
Dimensions 49,6x65,5 mm
Shaft Diameter 6 mm
Weight 409 g
Recomended model weight 3500 - 7000 g
Propeller range 20 cells 18"x11"
24 cells 17"x9"
30 cells 14"x10"
 
 
         

                    
      

 		  
 
Speed controllers for 4130-20
More than 20 cells (6S):  Hacker Master 48 OPTO or Hacker Master 77 OPTO

Data Table for 4130-20

Motor Propeller
(no gearbox)		 Battery I/A RPM U (V) P- OUT (W) P- IN (W) Efficiency (%)
4130/20 13x11 Aer CAM Carbon 24xRC 1700 19,9 7660 27 465 537 87
4130/20 13x11 Aer CAM Carbon 30xRC 1700 28 9100 32,6 782 913 86
4130/20 14x8 Aer CAM Carbon 24xRC 1700 24,4 7360 26,5 555 647 86
4130/20 14x8 Aer CAM Carbon 30xRC 1700 33,3 8670 31,8 906 1059 86
4130/20 14x10 Aer CAM Carbon 20xRC 1700 22,6 6120 22,3 432 504 86
4130/20 14x10 Aer CAM Carbon 24xRC 1700 29,6 7010 25,9 649 767 85
4130/20 14x10 Aer CAM Carbon 30xRC 1700 39,6 8160 30,9 1024 1224 84
4130/20 16x8 Aer CAM Carbon 20xRC 1700 21,1 6220 22,5 404 475 85
4130/20 16x8 Aer CAM Carbon 24xRC 1700 27,5 7150 26,2 612 721 85
4130/20 16x8 Aer CAM Carbon 30xRC 1700 37,1 8360 31,2 980 1158 85
4130/20 16x10 Aer CAM Carbon 20xRC 1700 25,9 5920 22 482 570 85
4130/20 16x10 Aer CAM Carbon 24xRC 1700 33,3 6740 25,2 711 849 84
4130/20 17x9 Graup CAM fold prop 20xRC 1700 27,3 5830 21,8 503 595 85
4130/20 17x9 Graup CAM fold prop 24xRC 1700 35,1 6620 25,3 737 888 83
4130/20 18x11 Graup CAM fold prop 20xRC 1700 32,5 5490 21,3 572 692 83
4130/20 18x12 Aer CAM Carbon 20xRC 1700 33,6 5420 21,2 584 712 82
4130/20 18,5x12 Aer CAM Carbon 20xRC 1700 38,3 5120 20,7 631 793 80

 

Suggested Prop Adapters

For fixed props use any prop with 8mm hole to fit optional Radial Mounting set adapter:

Also see the amazing VarioProp Variable Pitch System
(no collet required if using radial mount; 6mm collet if front mounting):
* 2, 3, or 4-blade 12C Hub (bottom of page)
* 12C Blades

For Folding props use any Aeronaut Hub with or without Aeronaut spinner