Page 1 of 2

HP-LGUM1SBALAD-6 Click for Details Balance charge & store adapter for 1S LiPo as used in Eflite PZ UltraMicro and Kyosho Minium series models. This is for use with HYPERION EOS 6S Chargers together with HP-LGUM6PADAP 6-port charge adapter only. Fits compatible battery brands also, such as the Hyperion "UM" and 1S "M" types. US$1.95

HP-LGUM1SBALAD-7 Click for Details Balance charge & store adapter for 1S LiPo as used in Eflite PZ UltraMicro and Kyosho Minium series models. This version is for use with HYPERION EOS 7S Chargers togther with HP-LGUM6PADAP 6-port charge adapter only. Fits compatible battery brands also, such as the Hyperion "UM" and 1S "M" types. US$1.95

HP-LGUM6PADAP Click for Details Six-port parallel charge adapter for 1S LiPo as used in Eflite UltraMicro and Kyosho Minium series models. Fits compatible battery brands also, such as the Hyperion CX130-UM, CX160-UM and CX120-180-240mAh 1S "M" types. Includes gold 4mm connectors to charger output, as pictured US$7.95

HP-EM2 Click for Details Hyperion Emeter2 - Summer Campaign valid until Aug 31st, 2010 US$89.95

HP-EM2-SET Click for Details Hyperion Emeter2 + RDU set - Summer Campaign valid until Aug 31st, 2010 US$159.95

HP-EM2-SD-2GB Click for Details Genuine SanDisk brand 2GB SD Card, with most recent Emeter Help Files, Prop Constants, and Firmware version pre-loaded US$11.95

HP-EM2-LDU Click for Details The Hyperion LDU (local data unit) is an inexpensive alternative to the RDU unit, for bench testing.It must be connected to the Emeter II during test runs.It has the full functionality of the RDU, except for the Height (altitude) indicator. - Summer Campaign valid until Aug 31st, 2010 US$29.95

HP-EM2-RDU Click for Details Hyperion RDU Unit (Remote Data Unit, Logger) - Summer Campaign valid until Aug 31st, 2010 US$79.95

HP-EM2-TACHBL Click for Details Hyperion Phase Tachometer US$9.45

HP-EM2-TMP1 Click for Details Hyperion Temp Sensor Unit #1 US$9.95

HP-EM2-TMP23 Click for Details Hyperion Temp Sensor Unit #2 & #3 US$19.90

HP-EM2-4PINCBL Click for Details Hyperion Emeter2<>RDU Data Cable US$5.95

HP-EM2-PWRCBL Click for Details Hyperion Emeter2 Power Input Cable US$3.75

HP-EM2-YCBLTHR Click for Details Hyperion Emeter2 Y-Cable RDU<>THROTTLE for Logging/Control US$4.95

HP-SW-OUT-TAM Click for Details Charge Harness for TAMIYA Plug. May be used with Hyperion CLASSIC Car Packs, or any pack which has a standard Tamiya connector US$3.95

AC-LIPOSACK Click for Details Lipo Sack - 228 x 308 mm US$22.95

AC-LIPOSACK-P Click for Details Lipo Sack Plus - 455 x 328 mm US$34.95

HP-CONN-40-2MF Click for Details 4.0mm Long Gold Bullet CONNECTORS 2 Male, 2 Female, 2 pcs Black Shrink Tube, 2pcs Red, for connecting battery to speed controller in systems 20A to 60A continuous, 100A peak 5 seconds. US$3.20

HP-EMETER* Click for Details Hyperion Emeter - the ultimate analysis tool for Eflight, with included 100A+ Ultra Shunt (0.1A read) - SEE DROPDOWN LIST FOR ACCESSORIES HP-EM-TITANCABLE | Emeter Program Cable for Titan ESC [ $2.95 ]

HP-EOS0403i Click for Details Hyperion EOS 0403i 4S 3A max CHARGER , with Integrated LBA balancer. LiPoly(3.7v) and LiFePO4/A123(3.3v) charge modes. 11v~15VDC Inputs - Hyperion Balance Multi-Adapter included for 2S to 4S packs. See Details! US$49.95

HP-EOS0606i-AD-C Click for Details Hyperion EOS 0606i 6S 6A max CHARGER AC/DC now with STORE MODE. Integrated LBA balancer for LiPoly(3.7v), LiFePO4/A123(3.3v). Also Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC and 100v~240V AC Inputs - Hyperion and XH Balance Multi-Adapter included for 2S to 6S packs! US$109.95

HP-EOS0606i-C Click for Details Hyperion EOS 0606i 6S 6A max CHARGER (DC) now with STORE MODE. Integrated LBA balancer for LiPoly(3.7v), LiFePO4/A123(3.3v). Also Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC Inputs - Hyperion and XH Balance Multi-Adapter included for 2S to 6S packs! US$79.95

HP-EOS0606-PCCBL Click for Details Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOS0606i Series Chargers, for PC Connections US$2.50

HP-EOS0615iDUO3 Click for Details Hyperion EOS 0615i DUO3 1S-6S 16N CHARGER, with Integrated LBA10A balancer- DUAL 180W Outputs with max 12S SYNC MODE.Hyperion and XH Balance Multi-Adapter included for 2S to 6S packs! US$249.95

HP-EOS06-PCCBL Click for Details Harness to fit between HP-TI-PRGUSB USB-to-Serial Adapter and EOSxx NET/DUO Series Chargers, for PC Connections (does NOT fit 0720i NET3 and 0615i DUO3). US$2.50

HP-EOS0720iNET3 Click for Details Hyperion EOS 0720i NET3 7S 16N CHARGER, with Integrated LBA10A balancer, TCS and 250W charger power. Network to 500W and 14S max(2x7S balanced) - See Details! US$149.95

HP-EOS0610-MSC Click for Details Cable for Networking two EOS0610i/EOS0720i NET Chargers Together, for balance charging two packs as one 4S to 12S pack for 0610iNET, 4S to 14S pack for 0720iNET. US$4.80

HP-EOS07SENTRY Click for Details Know your packs! EOS SENTRY battery checker for LiIon, LiPo, LiFePO4, NiCd, and NiMH. See Details. US$23.95

HP-EOS1210I-A* Click for Details SALE! $40.00 OFF - Hyperion EOS 1210i 12S 30N CHARGER, with Terminal Capacity Selection and Speed 2C Rate - See Details! HP-EOS1210I-A | EOS 1210i-A CHARGER with A123 MODE + Output Cable [ $89.95 ] HP-EOS1210I-A-SET01 | 1210i A123, LBA10-A +Data and Output Cables [ $99.95 ] HP-EOS1210I-A-SET02 | 1210i A123, 2xLBA10-A +Data,Net,Output Cables [ $119.95 ]

HP-EOSCLIPS Click for Details Replacement clips for EOS NET and DUO chargers. Clips have 4mm female gold sockets, and Male connectors and shrink tube are included to allow upgrade of budget chargers with fixed clips. US$5.95

HP-EOSLBA-**HPEH Click for Details Balance Adapters to allow charging of G3 Packs on other-brand chargers which use JST EH Balance connectors. HP-EOSLBA-02HPEH | 2S Adapter for Hyperion Lipo/LiFe packs to Jst EH Chargers [ $1.85 ] HP-EOSLBA-03HPEH | 3S Adapter for Hyperion Lipo/LiFe packs to Jst EH Chargers [ $2.25 ] HP-EOSLBA-04HPEH | 4S Adapter for Hyperion Lipo/LiFe packs to Jst EH Chargers [ $2.65 ] HP-EOSLBA-05HPEH | 5S Adapter for Hyperion Lipo/LiFe packs to Jst EH Chargers [ $3.05 ] HP-EOSLBA-06HPEH | 6S Adapter for Hyperion Lipo/LiFe packs to Jst EH Chargers [ $3.45 ]

HP-EOSLBA-**HPTP Click for Details Balance Adapters to allow charging of G3 Packs on ThunderPower chargers. HP-EOSLBA-02HPTP | 2S Adapter for Hyperion Lipo/LiFe packs to Jst ThunderPower Chargers [ $2.45 ] HP-EOSLBA-03HPTP | 3S Adapter for Hyperion Lipo/LiFe packs to Jst ThunderPower Chargers [ $2.85 ] HP-EOSLBA-04HPTP | 4S Adapter for Hyperion Lipo/LiFe packs to Jst ThunderPower Chargers [ $3.25 ] HP-EOSLBA-05HPTP | 5S Adapter for Hyperion Lipo/LiFe packs to Jst ThunderPower Chargers [ $3.65 ] HP-EOSLBA-06HPTP | 6S Adapter for Hyperion Lipo/LiFe packs to Jst ThunderPower Chargers [ $4.05 ]

HP-EOSLBA-**HPXH Click for Details Balance Adapters to allow charging of G3 Packs on other-brand chargers which use JST XH Balance connectors. HP-EOSLBA-02HPXH | 2S Adapter for Hyperion Lipo/LiFe packs to Jst XH Chargers [ $1.85 ] HP-EOSLBA-03HPXH | 3S Adapter for Hyperion Lipo/LiFe packs to Jst XH Chargers [ $2.25 ] HP-EOSLBA-04HPXH | 4S Adapter for Hyperion Lipo/LiFe packs to Jst XH Chargers [ $2.65 ] HP-EOSLBA-05HPXH | 5S Adapter for Hyperion Lipo/LiFe packs to Jst XH Chargers [ $3.05 ] HP-EOSLBA-06HPXH | 6S Adapter for Hyperion Lipo/LiFe packs to Jst XH Chargers [ $3.45 ]

HP-EOSLBA-26**-B Click for Details Balancer Multi-Adapter for EOS LBA10 and Hyperion Balance Chargers. This is the 2S to 6S Board ONLY. Available in Versions for All Lipoly Pack Major Brands SEE DETAILS for APPLICATIONS HP-EOSLBA-26CP-B | LBA10/BC 2S-6S MultiAdapter Board FMA CellPro [ $5.50 ] HP-EOSLBA-26EH-B | LBA10/BC 2S-6S MultiAdapter Board only JST EH [ $4.95 ] HP-EOSLBA-26HP-B | LBA10/BC 2S-6S MultiAdapter Board only HP/PQ [ $4.95 ] HP-EOSLBA-26TP-B | LBA10/BC 2S-6S MultiAdapter Board only TP/FP [ $4.95 ] NO STOCKHP-EOSLBA-26XH-B | LBA10/BC 2S-6S MultiAdapter Board only JST XH [ $4.95 ]

HP-EOSLBA-26CBL Click for Details Longer harnesses to fit between HP-EOSLBA-26xx Multi-Adapters and EOS Balance Chargers or LBA10 balancer US$2.75

HP-EOSLBA-7U**-B Click for Details Balancer Multi-Adapter for EOS0720iNET Balance Chargers. This is the 2S to 7S Board ONLY. Available in Versions for All Lipoly Pack Major Brands SEE DETAILS for APPLICATIONS HP-EOSLBA-7U-B | EOS0720iNET 2S-7S MultiAdapter Board only HP-PQ [ $5.25 ] HP-EOSLBA-7UEH-B | EOS0720iNET 2S-7S MultiAdapter Board only JST EH [ $5.25 ] HP-EOSLBA-7UFP-B | EOS0720iNET 2S-7S MultiAdapter Board only TP-FP [ $5.25 ] HP-EOSLBA-7UXH-B | EOS0720iNET 2S-7S MultiAdapter Board only JST XH [ $5.25 ]

HP-EOSLBA-7UCBL Click for Details Harnesses to fit between HP-EOSLBA-7Uxx Multi-Adapters and EOS 0720iNET Balance Chargers US$3.15

HP-EOSLBA-MC-A* Click for Details Balance MULTI-CONNECTORS - ADAPTER SIDE - FEMALE housing, 100mm leads HP-EOSLBA-MC-A4 | FEMALE Adapter Side for 2S to 4S [ $1.59 ] HP-EOSLBA-MC-A5 | FEMALE Adapter Side for 5S [ $1.65 ] HP-EOSLBA-MC-A6 | FEMALE Adapter Side for 6S [ $1.70 ]

HP-EOSLBA-MC-H*H Click for Details Optional LBA6 Harnesses for those who often charge over 3A. (does NOT fit LBA10) HP-EOSLBA-MC-H2H | LBA 6 HiAmp Harness 2S [ $2.45 ] HP-EOSLBA-MC-H3H | LBA 6 HiAmp Harness 3S [ $2.73 ] HP-EOSLBA-MC-H4H | LBA 6 HiAmp Harness 4S [ $3.22 ] HP-EOSLBA-MC-H5H | LBA 6 HiAmp Harness 5S [ $3.71 ]

HP-EOSLBA-MC-H*S Click for Details Standard Replacement Harnesses for LBA 6 (same as come with the LBA6 - does NOT fit LBA10) HP-EOSLBA-MC-H3S | LBA 6 Standard Harness 3S [ $3.36 ]

Next page

Top Selling Products